Select your vehicle brand and the topic you are interested in.
Warning lights and driver messages
Warning lights and driver messages
Engine, lubrication and cooling
EPC – petrol engine management · multiple meanings of the same symbol
EPC – petrol engine management
Yellow / amber · Warning · Steady
Meaning
The petrol engine management system has detected a fault. EPC does not identify a particular failed component.
Recommended action
Arrange engine inspection promptly. Brief illumination with the ignition on is a check; the lamp should go out after starting.
Key indication
This is an example of an indication. Check its meaning for your specific model and equipment against the exact message and your vehicle’s owner’s manual.
Electric drive – EPC motor-control fault
Yellow / amber · Warning · Steady
Meaning
On this electric Enyaq, EPC is separately documented as a motor-control fault indication. This is not the petrol-engine interpretation.
Recommended action
Obtain professional assistance and follow any additional vehicle messages.
Key indication
Only the listed versions and equipment are covered. Follow the exact message and your vehicle’s manual.
Emissions system – MIL steadily lit
Yellow / amber · Warning · Steady
Meaning
An emissions system fault has been detected. The symbol alone does not identify a failed component.
Recommended action
Reduce load and arrange inspection as directed by the manual and message. If running is abnormal, other warnings appear or STOP is displayed, stop safely and seek assistance.
Key indication
This is an example of an indication. Check its meaning for your specific model and equipment against the exact message and your vehicle’s owner’s manual.
Flashing glow plug lamp – diesel management fault
Yellow / amber · Warning · Flashing
Meaning
Flashing while running indicates a diesel engine management fault. It does not automatically identify faulty glow plugs.
Recommended action
Arrange professional inspection promptly and follow any additional messages or power restrictions.
Key indication
This is an example of an indication. Check its meaning for your specific model and equipment against the exact message and your vehicle’s owner’s manual.
Enyaq iV – coolant warning
Red · Warning · Steady / flashing
Meaning
The separate coolant symbol lights up or flashes for excessive temperature or low level. Do not confuse it with the combined electrical-system overheating warning.
Recommended action
Stop safely. Check the level only by the safe procedure in the manual after cooling. If the warning persists with the correct level or safe topping-up is not possible, do not continue; obtain professional assistance.
Key indication
For the combined electrical-system overheating warning on page 201: stop, switch off the ignition, do not add coolant and obtain assistance.
Brakes and stability systems
Low brake fluid level · multiple meanings of the same symbol
Low brake fluid level
Red · Warning · Steady
Meaning
A message with the red brake symbol indicates that the brake fluid level is too low.
Recommended action
Do not continue driving. Stop safely and obtain professional assistance; low fluid can lead to brake failure.
Key indication
This is an example of an indication. Check its meaning for your specific model and equipment against the exact message and your vehicle’s owner’s manual.
Electromechanical brake servo not working
Red · Warning · Steady
Meaning
Brake assistance is not working. More pedal force is required and stopping distances increase.
Recommended action
Stop safely, applying greater brake pedal force as required. Do not continue driving; obtain professional assistance immediately.
Key indication
This is an example of an indication. Check its meaning for your specific model and equipment against the exact message and your vehicle’s owner’s manual.
Brake pad wear
Yellow / amber · Warning · Steady
Meaning
The system indicates that the brake pads require inspection.
Recommended action
Arrange prompt professional brake inspection and pad replacement as required. The lamp does not indicate how many kilometres remain before replacement.
Key indication
This is an example of an indication. Check its meaning for your specific model and equipment against the exact message and your vehicle’s owner’s manual.
ABS fault
Yellow / amber · Warning · Steady
Meaning
The anti-lock braking system is not working correctly or is unavailable. Normal braking may remain available without ABS protection.
Recommended action
Arrange professional inspection promptly. If a red brake warning or STOP instruction also appears, stop safely and follow the exact message.
Key indication
This is an example of an indication. Check its meaning for your specific model and equipment against the exact message and your vehicle’s owner’s manual.
ESC / TCS intervention · multiple meanings of the same symbol
ESC / TCS intervention
Yellow / amber · Operating information · Flashing
Meaning
Flashing indicates that stability or traction control is intervening. It does not by itself indicate a fault.
Recommended action
Adapt speed and driving style to available grip and traffic conditions. The system cannot overcome physical limits.
Key indication
This is an example of an indication. Check its meaning for your specific model and equipment against the exact message and your vehicle’s owner’s manual.
ESC fault or system-induced deactivation
Yellow / amber · Warning · Steady
Meaning
A lamp that stays on after the initial check may indicate a fault or system-induced deactivation. This differs from flashing during intervention.
Recommended action
Read the message and follow the cited manual. If the lamp remains on, arrange professional inspection; do not rely on stability control being available.
Key indication
This is an example of an indication. Check its meaning for your specific model and equipment against the exact message and your vehicle’s owner’s manual.
Parking brake applied · multiple meanings of the same symbol
Parking brake applied
Red · Operating information · Steady
Meaning
A red P in a circle confirms that the parking brake is applied. It is an operating status, not automatically a fault.
Recommended action
Release the parking brake as instructed before driving away. When parking, check that the vehicle is secured safely.
Key indication
This is an example of an indication. Check its meaning for your specific model and equipment against the exact message and your vehicle’s owner’s manual.
Parking brake – parking position on an excessively steep gradient
Red · Warning · Flashing
Meaning
In this Enyaq edition, flashing red P with the corresponding message warns that the parking position has an excessively steep gradient. Not the same interpretation as the steady amber parking-brake fault indicator.
Recommended action
Secure the vehicle against movement and follow the instruction to find another parking place with a gentler gradient. Do not decide from colour or one photograph alone.
Key indication
Only the specified message and model edition. Steady red P during ordinary vehicle securing is an operating state, not this flashing warning.
AUTO HOLD – vehicle held
Green · Operating information · Steady
Meaning
The green inscription confirms that the function is currently holding the stationary vehicle.
Recommended action
Check the active state before releasing the brake pedal. The function does not replace safe parking; do not leave the vehicle with the drive system on.
Key indication
This is an example of an indication. Check its meaning for your specific model and equipment against the exact message and your vehicle’s owner’s manual.
AUTO HOLD – switched on, not holding
Grey · Operating information · Steady
Meaning
The grey inscription means the function is switched on. It does not mean the brakes are currently holding the vehicle.
Recommended action
Keep the brake pedal pressed as necessary. Active holding is confirmed by the green inscription; secure the vehicle properly when parking.
Key indication
This is an example of an indication. Check its meaning for your specific model and equipment against the exact message and your vehicle’s owner’s manual.
Steering, chassis and tyres
Low tyre pressure or tyre damage · multiple meanings of the same symbol
Low tyre pressure or tyre damage
Yellow / amber · Warning · Steady
Meaning
The system detected a significant change from stored values. The listed versions use indirect monitoring based on ABS data.
Recommended action
Stop safely and check all tyres and pressures. Store reference values only after proper inspection and correction; resetting does not repair a puncture.
Key indication
This is an example of an indication. Check its meaning for your specific model and equipment against the exact message and your vehicle’s owner’s manual.
Tyre pressure monitoring fault
Yellow / amber · Warning · Flashing, then steady
Meaning
The lamp flashes for approximately one minute and then stays on. This indicates a system fault, not confirmation of correct pressures.
Recommended action
Check tyres and pressures first. Follow the manual for restarting and calibration; obtain professional inspection if the fault persists.
Key indication
This is an example of an indication. Check its meaning for your specific model and equipment against the exact message and your vehicle’s owner’s manual.
Steering – red warning · multiple meanings of the same symbol
Steering – red warning
Red · Warning · Steady
Meaning
Steering fault; power assistance may be unavailable.
Recommended action
Stop safely and do not continue driving. Obtain professional assistance.
Key indication
This is an example of an indication. Check its meaning for your specific model and equipment against the exact message and your vehicle’s owner’s manual.
Steering lock – red flashing
Red · Warning · Flashing
Meaning
A flashing red symbol with the corresponding message indicates a steering-lock fault.
Recommended action
Stop the vehicle, do not continue driving and obtain professional assistance. Follow the exact message for the vehicle.
Key indication
Do not confuse this with the flashing amber fault or the amber lock-not-released state. On the 11.2020 Enyaq, switching the ignition off may then prevent the ignition from being switched on again, the steering from being locked or electrical equipment from being operated.
Steering – restricted operation · multiple meanings of the same symbol
Steering – restricted operation
Yellow / amber · Warning · Steady
Meaning
Steering assistance or response may differ from normal.
Recommended action
Follow the message and manual procedure. If the lamp remains on after that procedure, have the steering checked by a specialist workshop.
Key indication
This is an example of an indication. Check its meaning for your specific model and equipment against the exact message and your vehicle’s owner’s manual.
Steering – yellow flashing and column lock
Yellow / amber · Warning · Flashing
Meaning
The steering column is under tension or is not locking or unlocking correctly. Read the accompanying message.
Recommended action
With the vehicle stationary, follow the manual. If the column remains locked or flashing persists, do not continue; obtain professional assistance.
Key indication
This is an example of an indication. Check its meaning for your specific model and equipment against the exact message and your vehicle’s owner’s manual.
Enyaq – steering-lock fault, amber flashing
Yellow / amber · Warning · Flashing
Meaning
A flashing amber symbol with a fault message indicates a steering-lock fault. It is not the lock-not-released state.
Recommended action
You may continue driving with increased caution; seek a specialist workshop.
Key indication
Only Enyaq iV 5A, 11.2020 edition. The accompanying message determines the state.
Enyaq – steering lock not released
Yellow / amber · Warning · Flashing
Meaning
A flashing amber symbol with a request to move the wheel means the steering lock has not released. It is not a general power-steering fault.
Recommended action
Move the steering wheel alternately in both directions. If the steering does not unlock, stop the vehicle and obtain professional assistance.
Key indication
Only Enyaq iV 5A, 11.2020 edition. Distinguish it from the amber lock fault for which cautious continued driving is permitted.
Airbags and safety systems
Seat belt not fastened
Red · Warning · Steady / flashing
Meaning
The warning indicates an unfastened driver’s or passenger’s seat belt. It may flash and sound while driving.
Recommended action
Before driving, ensure all occupants fasten their belts correctly and children use an appropriate restraint.
Key indication
This is an example of an indication. Check its meaning for your specific model and equipment against the exact message and your vehicle’s owner’s manual.
Airbag / belt tensioners deactivated by diagnostic tester · multiple meanings of the same symbol
Airbag / belt tensioners deactivated by diagnostic tester
Yellow / amber · Warning · After ignition: steady for 4 s, then flashing for 12 s
Meaning
The symbol may accompany diagnostic deactivation of an airbag or belt tensioner. The signal sequence depends on model and edition: Enyaq iV 11.2020 and Octavia 11.2018 specify illumination for 4 s after ignition is switched on, followed by flashing for 12 s; Born 08.21 specifies illumination. Follow the exact message and the specific vehicle manual.
Recommended action
Ask a specialist workshop to check whether the system should remain deactivated. The symbol alone does not establish the cause.
Key indication
Only the listed versions and equipment are covered. Follow the exact message and your vehicle’s manual.
Airbags – steady fault warning
Yellow / amber · Warning · Steady
Meaning
A steady symbol with a fault message indicates a restraint-system malfunction.
Recommended action
Arrange prompt professional inspection. System protection may be impaired in an accident.
Key indication
This is an example of an indication. Check its meaning for your specific model and equipment against the exact message and your vehicle’s owner’s manual.
Proactive occupant protection unavailable or restricted
Yellow / amber · Warning · Steady
Meaning
With the corresponding message, the airbag symbol can indicate restricted proactive occupant protection. The accompanying text identifies the condition.
Recommended action
Have the safety systems professionally inspected promptly.
Key indication
This is an example of an indication. Check its meaning for your specific model and equipment against the exact message and your vehicle’s owner’s manual.
Lighting and visibility
Main beam headlights
Blue · Operating information · Steady
Meaning
Main beam or the headlight flasher is on.
Recommended action
Use them considerately and dip in good time to avoid dazzling others.
Key indication
This is an example of an indication. Check its meaning for your specific model and equipment against the exact message and your vehicle’s owner’s manual.
Rear fog light
Yellow / amber · Operating information · Steady
Meaning
The rear fog light is on. This is an operating indication, not an engine fault.
Recommended action
Use it according to visibility and applicable rules. Switch it off when visibility improves.
Key indication
This is an example of an indication. Check its meaning for your specific model and equipment against the exact message and your vehicle’s owner’s manual.
Exterior lighting fault
Yellow / amber · Warning · Steady
Meaning
The vehicle has detected a lighting fault. Identify the affected light from the message and inspection.
Recommended action
Check the lights and arrange repair. Follow the manual; some light sources are not user-replaceable.
Key indication
This is an example of an indication. Check its meaning for your specific model and equipment against the exact message and your vehicle’s owner’s manual.
Turn signals or hazard warning lights
Green · Operating information · Flashing
Meaning
Flashing indicates turn signals or hazard warning lights in operation. A faster rate may indicate a failed turn signal on the listed versions.
Recommended action
Check that the lights work correctly. Use hazard lights as appropriate when securing the vehicle.
Key indication
This is an example of an indication. Check its meaning for your specific model and equipment against the exact message and your vehicle’s owner’s manual.
Light Assist – automatically activated main beam, blue A · multiple meanings of the same symbol
Light Assist – automatically activated main beam, blue A
Blue · Operating information · Steady
Meaning
In the cited Enyaq, Born and Terramar editions, the blue A symbol denotes automatically activated main beam according to each edition’s own operating instructions. The neutral assistant-enabled indication is a different state.
Recommended action
Watch oncoming/preceding vehicles and other road users. Switch main beam off manually when necessary; an obscured camera or poorly lit road user may not be recognised correctly.
Key indication
Applies only to the listed model editions and equipment. Do not confuse with the Tarraco 06.2023 blue variant, whose own legend is documented separately. Intervene manually if dazzling is possible.
Dynamic Light Assist – automatic main beam with beam adaptation
Blue · Operating information · Steady
Meaning
On the specified Enyaq equipment, blue A indicates automatically activated main beam. Dynamic Light Assist additionally adapts the beam to avoid dazzling oncoming/preceding vehicles; the indicator does not guarantee their recognition.
Recommended action
Intervene manually if there is a risk of dazzling. Account for obscured, dirty or failed lamps on other vehicles and the conditions in the actual manual.
Key indication
Only Dynamic Light Assist equipment, not automatically all Enyaqs. The same A shape on ordinary Light Assist does not establish dynamic beam adaptation.
Left direction indicator
Green · Operating information · Flashing
Meaning
Flashing indicates turn signals or hazard warning lights in operation. A faster rate may indicate a failed turn signal on the listed versions.
Recommended action
Check that the lights work correctly. Use hazard lights as appropriate when securing the vehicle.
Key indication
The individual arrow shows the relevant direction. Both arrows flashing together during hazard operation are a different state not depicted by this image.
Right direction indicator
Green · Operating information · Flashing
Meaning
Flashing indicates turn signals or hazard warning lights in operation. A faster rate may indicate a failed turn signal on the listed versions.
Recommended action
Check that the lights work correctly. Use hazard lights as appropriate when securing the vehicle.
Key indication
The individual arrow shows the relevant direction. Both arrows flashing together during hazard operation are a different state not depicted by this image.
Driver assistance systems
Lane Assist active and available
Green · Operating information · Steady
Meaning
The system has detected conditions for lane keeping assistance. The green lamp does not indicate autonomous driving.
Recommended action
Watch traffic, keep your hands on the wheel and be ready to steer at all times. Observe lane detection limits and vehicle instructions.
Key indication
This is an example of an indication. Check its meaning for your specific model and equipment against the exact message and your vehicle’s owner’s manual.
Lane Assist steering correction
Yellow / amber · Operating information · Steady
Meaning
In this version, the yellow symbol indicates a corrective steering intervention. It differs from the fault symbol with an additional marking.
Recommended action
Watch traffic, keep your hands on the wheel and be ready to steer at all times. Observe lane detection limits and vehicle instructions.
Key indication
This is an example of an indication. Check its meaning for your specific model and equipment against the exact message and your vehicle’s owner’s manual.
ACC unavailable
Yellow / amber · Function restricted · Steady
Meaning
Distance regulation is unavailable. Possible causes include an obstructed radar view, misalignment or a fault; the symbol alone does not identify a defective sensor.
Recommended action
Control speed and distance yourself. Check accessible sensor areas as instructed; arrange professional inspection if the problem persists.
Key indication
This is an example of an indication. Check its meaning for your specific model and equipment against the exact message and your vehicle’s owner’s manual.
ACC regulating – no vehicle detected ahead
Green · Operating information · Steady
Meaning
Adaptive cruise control is regulating the selected speed, but no vehicle is detected ahead in this state. A different graphic version indicates a detected vehicle.
Recommended action
Watch traffic and be ready to brake. ACC may not detect every obstacle in time; respond immediately to a takeover or braking prompt.
Key indication
This is an example of an indication. Check its meaning for your specific model and equipment against the exact message and your vehicle’s owner’s manual.
Driver alert – break recommendation
White · Warning · Symbol with message
Meaning
The system recommends a break based on driving behaviour. It does not measure health or guarantee detection of every case of fatigue.
Recommended action
If tired, stop safely and rest. Do not wait for a system warning; the driver remains responsible for being fit to drive.
Key indication
White information version of the cup; display background and accompanying message vary by version.
ACC on standby, not regulating
Grey · Operating information · Steady
Meaning
ACC is on standby. A stored speed and distance do not mean the system is currently controlling speed or braking.
Recommended action
Watch traffic and be ready to brake. ACC may not detect every obstacle in time; respond immediately to a takeover or braking prompt.
Key indication
This is an example of an indication. Check its meaning for your specific model and equipment against the exact message and your vehicle’s owner’s manual.
ACC – take control and brake
Red · Warning · Steady
Meaning
Automatic ACC deceleration is insufficient in the current situation. The vehicle requests driver intervention. Do not confuse this red symbol with the green prompt during gear selection.
Recommended action
Take control of speed immediately and brake as necessary. Do not wait for ACC to resolve the danger by itself.
Key indication
This is an example of an indication. Check its meaning for your specific model and equipment against the exact message and your vehicle’s owner’s manual.
Take-over steering request
White · Information / warning depending on state · Steady
Meaning
The vehicle asks the driver to take over steering. This does not confirm that the system can handle the situation independently.
Recommended action
Safely take over steering, monitor traffic and follow the exact vehicle message. Be ready to brake.
Key indication
The indicator illuminates white and an accompanying prompt appears; the reviewed chapters do not state flashing. The red request has higher urgency. Association with Travel Assist, Emergency Assist or Lane Assist depends on equipment and the cited manual.
Take over steering immediately
Red · Warning · Steady
Meaning
The vehicle requests immediate driver steering control.
Recommended action
Safely take over steering immediately, monitor traffic and follow the exact vehicle message. Be ready to brake.
Key indication
The indicator illuminates red with an accompanying message; depending on the situation, a sound or steering-wheel vibration follows. The reviewed chapters do not state flashing. Association with Travel Assist, Emergency Assist or Lane Assist depends on equipment and the cited manual.
Transmission and drive
Press the brake pedal · multiple meanings of the same symbol
Press the brake pedal
Green · Operating information · Steady
Meaning
The brake pedal is not pressed when engaging drive or changing the selector position.
Recommended action
Press the brake pedal and carry out the requested operation as instructed.
Key indication
This is an example of an indication. Check its meaning for your specific model and equipment against the exact message and your vehicle’s owner’s manual.
Selector lock prevents moving off
Green · Operating information · Flashing
Meaning
The flashing green symbol relates to the selector interlock; the locking button is not properly engaged.
Recommended action
With the vehicle stationary, check the selector locking button and follow the manual.
Key indication
This is an example of an indication. Check its meaning for your specific model and equipment against the exact message and your vehicle’s owner’s manual.
Battery and electrical system
12 V battery – message requests inspection or replacement · multiple meanings of the same symbol
12 V battery – message requests inspection or replacement
Yellow / amber · Warning · Steady
Meaning
With the specific replacement message, the battery is nearing the end of its service life. Other yellow messages with the same symbol can have a different meaning.
Recommended action
Have the 12 V battery professionally checked and replaced if required. Follow the wording of the message.
Key indication
This is an example of an indication. Check its meaning for your specific model and equipment against the exact message and your vehicle’s owner’s manual.
Enyaq iV – 12 V battery or related-system fault
Yellow / amber · Warning · Steady
Meaning
The yellow battery symbol, additional warning and exact message identify a fault in the 12 V battery or associated systems.
Recommended action
Contact a specialist workshop. The symbol alone does not prove that the battery is defective or needs replacement.
Key indication
Only the listed versions and equipment are covered. Follow the exact message and your vehicle’s manual.
Enyaq iV – low 12 V battery charge
Yellow / amber · Warning · Steady
Meaning
With the corresponding message, the yellow symbol indicates a weak or discharged 12 V battery. It differs from the red charging-fault warning.
Recommended action
Follow the exact message and charging instructions. This edition describes charging while driving or with suitable charging equipment; additional warnings may prevent continued driving.
Key indication
Only the listed versions and equipment are covered. Follow the exact message and your vehicle’s manual.
Enyaq iV – 12 V battery not charging
Red · Warning · Steady
Meaning
The red battery symbol with an accompanying warning indicates a 12 V battery charging fault.
Recommended action
Do not continue driving. Stop safely, switch off the ignition and obtain professional assistance.
Key indication
This is an example of an indication. Check its meaning for your specific model and equipment against the exact message and your vehicle’s owner’s manual.
Electric vehicles and plug-in hybrids
e-Sound / AVAS warning sound fault
Yellow / amber · Function restricted · Steady
Meaning
The electronic vehicle sound is not working. Other road users may not hear the approaching vehicle.
Recommended action
Drive with particular care and arrange prompt professional inspection as directed by the cited manual and any further messages.
Key indication
This is an example of an indication. Check its meaning for your specific model and equipment against the exact message and your vehicle’s owner’s manual.
Electric drive – reduced available power
Yellow / amber · Function restricted · Steady
Meaning
Available power is restricted and may decrease further depending on conditions. Charge level or high-voltage battery temperature may be involved; this is not an automatic diagnosis of battery failure.
Recommended action
Follow the message and power display and adapt driving to reduced acceleration. If charge is low, follow the manual and charge the battery. If safe driving is not possible, stop safely and obtain help.
Key indication
No remaining range is guaranteed. Red turtle indications have separate model-specific explanations; changing the colour does not preserve the procedure.
Enyaq iV – insufficient driving power, red turtle
Red · Function restricted · Steady
Meaning
In this Enyaq edition the red symbol denotes insufficient driving power when the high-voltage battery charge is very low. Very low or high battery temperatures can also affect available power.
Recommended action
The manual calls for charging the high-voltage battery and adapting driving to available power. Allow for limited speed and acceleration. If safe travel is not possible, stop safely and obtain help; observe any additional vehicle messages.
Key indication
Only Enyaq iV, DE manual 11.2020 pp. 17 and 100–101. Distinguish amber restricted power. The same red turtle has different specific instructions in an Audi Q4 edition; those are not inherited here. This warning alone identifies neither a failed battery nor remaining range.
Operating and information symbols
Central warning – priority 1
Red · Warning · Steady / flashing
Meaning
A high-priority warning accompanied by a specific message and possibly a sound. The triangle alone does not identify a failed component.
Recommended action
Stop safely, do not continue driving and follow the specific message. Obtain professional assistance as required.
Key indication
This is an example of an indication. Check its meaning for your specific model and equipment against the exact message and your vehicle’s owner’s manual.
Central warning – priority 2
Yellow / amber · Warning · Steady / flashing
Meaning
A malfunction or low operating fluid may cause damage. The accompanying message determines the exact meaning.
Recommended action
Check the indicated function promptly and follow the message. Yellow is not universal permission to continue driving.
Key indication
This is an example of an indication. Check its meaning for your specific model and equipment against the exact message and your vehicle’s owner’s manual.
Infotainment and control symbols
Media
File and multimedia database management
Control symbol
Meaning and function
Opens the file manager or multimedia database of the connected resource.
Next track
Control symbol
Meaning and function
Press to play the next track; hold is used to fast forward.
Pause playback
Control symbol
Meaning and function
Pauses media playback.
Start playback
Control symbol
Meaning and function
Starts media playback.
Previous track or return to the beginning
Control symbol
Meaning and function
Pressing the button within 3 seconds of the start plays the previous track; pressing it after 3 seconds restarts the current track. Holding the button rewinds the track.
Repeating an album or folder
Control symbol
Meaning and function
Turns the repeat of the current album or folder on or off.
Repeating the current track
Control symbol
Meaning and function
Turns on or off the repeat of the currently playing track.
Random playback order
Control symbol
Meaning and function
Turns random playback of the current album or folder on or off.
Radio
DAB signal is not available
Control symbol
Meaning and function
DAB signal is not available for the given digital station.
Uncertain DAB reception
Control symbol
Meaning and function
The signal reception of the given digital station is uncertain.
Station saved to favorites
Control symbol
Meaning and function
Indicates a station stored in favorite station presets.
Filtering the list of FM stations
Control symbol
Meaning and function
Opens options for filtering FM stations alphabetically, by group or by genre; RDS and AF must be switched on.
The radio station being played
Control symbol
Meaning and function
Indicates the station you are currently listening to.
Updating the station list
Control symbol
Meaning and function
Manually updates the list of available radio stations.
Traffic news station
Control symbol
Meaning and function
Indicates a radio station that broadcasts traffic news.
Phone and messages
Answer the call or return to the call
Control symbol
Meaning and function
Answers an incoming call or resumes a held call; in a conference call, it is also used to return to the held conference.
Switch the call sound to the speakers
Control symbol
Meaning and function
Switches the call sound from the phone to the vehicle's speakers.
Call lists
Control symbol
Meaning and function
Opens the phone call lists.
Caller or conference participant details
Control symbol
Meaning and function
Shows caller details; within conference details, it shows the details of the selected participant.
Conference call details
Control symbol
Meaning and function
Opens the details of an ongoing conference call.
Talk to a participant outside the conference
Control symbol
Meaning and function
In the conference details, it will enable a separate call with the selected participant outside the conference call.
Create a conference call
Control symbol
Meaning and function
Combines calls into a conference call if the function is available and the conditions of the connected phone are met.
Telephone contacts
Control symbol
Meaning and function
Opens the phone contact list.
Entering a phone number
Control symbol
Meaning and function
Opens phone number entry.
End or reject the call
Control symbol
Meaning and function
Depending on the situation, it ends dialing, rejects an incoming call or terminates an ongoing call; the same symbol also ends the conference.
Call on hold
Control symbol
Meaning and function
Holds the current call; in a conference allows you to leave it temporarily while the conference continues in the background.
Messages
Control symbol
Meaning and function
Opens the text message menu.
Mute the microphone
Control symbol
Meaning and function
Mutes the microphone during a call or conference call.
Turn on the microphone
Control symbol
Meaning and function
Turns on the microphone during a call or conference call.
Turn off ringtone
Control symbol
Meaning and function
Incoming call ringer mute control; it's a ringtone status, not a phone fault.
Turn on ringtone
Control symbol
Meaning and function
Incoming call ringer activation control.
Swap primary and secondary phones
Control symbol
Meaning and function
It swaps the roles of the main and additional phone connected to the infotainment.
Forwarding a text message
Control symbol
Meaning and function
Forwards the received message; it can be edited before sending.
Received text messages
Control symbol
Meaning and function
Opens received text messages; after selecting a specific message, its contents will be displayed.
Additional functions of received messages
Control symbol
Meaning and function
Opens other functions of the received message: reply with a template, delete or recognize phone numbers.
New text message
Control symbol
Meaning and function
Opens Create a new text message in the Phone menu.
Read a text message aloud
Control symbol
Meaning and function
Reads the received text message aloud using the infotainment system’s synthesised voice.
Reply to sender
Control symbol
Meaning and function
Allows you to reply to the sender of a received text message.
Sending a text message
Control symbol
Meaning and function
Sends a prepared message to selected and confirmed recipients.
Phone and app connectivity
Active location services
Control symbol
Meaning and function
The symbol in the status bar indicates active Škoda Connect location services; information about individual services is in the service management.
Control buttons below
Control symbol
Meaning and function
When controlling a running MirrorLink app, it displays the control buttons at the bottom.
Control buttons on top
Control symbol
Meaning and function
When controlling a running MirrorLink application, it displays the control buttons at the top.
The application cannot be controlled while driving
Control symbol
Meaning and function
Indicates the MirrorLink application cannot be controlled while driving.
Return to the MirrorLink main menu
Control symbol
Meaning and function
When controlling a running application, it returns to the MirrorLink main menu.
Last running MirrorLink application
Control symbol
Meaning and function
Displays the last running application on the connected mobile device.
List of running MirrorLink applications
Control symbol
Meaning and function
Displays a list of running applications in the MirrorLink environment.
Return to the main SmartLink menu
Control symbol
Meaning and function
In the MirrorLink environment, it returns to the main SmartLink menu.
Ending an active SmartLink connection
Control symbol
Meaning and function
Terminates the active connection of the mobile device via SmartLink.
About SmartLink
Control symbol
Meaning and function
Displays information about the SmartLink feature.
Other symbols
Settings
Control symbol
Meaning and function
Opens the settings of the current infotainment menu.
Unsure what an indicator means?
When contacting the workshop, tell us the model, production year, powertrain and exact message. A photograph of the entire instrument cluster message and whether the lamp is steady or flashing will help. Take photographs only with the vehicle safely parked.
Workshop hours: Mon–Fri 9:00–18:00.
Office and bookings: +420 605 399 448
Workshop: +420 608 313 437
This is not a 24-hour breakdown service. A photograph alone is not sufficient to diagnose a fault.