Immobilised car: towing and loading for your vehicle
Applicability depends on the engine, equipment and vehicle specification. Selecting a brand alone does not identify a particular vehicle.
A car that will not start or activate its drive system does not, by that fact alone, determine how it can be towed. When requesting assistance, also describe the conditions for moving it safely.
Which vehicles this advice covers
Volkswagen Group vehicles with combustion, hybrid or electric drive. The specific version, its handbook and the current condition of the vehicle are decisive.
What to do now
Do not start towing the car with another vehicle without checking that this is permitted for the specific vehicle and fault. Do not force a locked selector, steering or wheels to release. Give the assistance or recovery service the exact warning message.
What to prepare when requesting assistance
- The location and access to the vehicle.
- The model, VIN and type of drive; the transmission version too, if known.
- A photograph of the complete instrument panel message.
- Whether the instrument panel works and whether neutral can be selected as described in the handbook.
- Whether the steering is unlocked and whether any wheels are visibly damaged or locked.
- Whether an accident, fluid leak or unusual mechanical noise preceded the problem.
Towing and loading are different
Towing along the road, lifting one axle and loading the whole vehicle are different methods. A DSG, 4Motion or quattro badge alone does not identify the permitted method.
Example: the CUPRA Born handbook, edition 07/2025, requires all four wheels to be supported when transported on a recovery vehicle. This is not a universal requirement for other models.
Report a locked vehicle before the recovery service arrives
If the steering, parking brake or selector cannot be released, say so when requesting assistance. The service must choose an appropriate handling method. Do not check whether the wheels rotate freely by driving or towing the vehicle.
Emergency release procedures, attachment points and movement restrictions must be checked against the specific handbook and fault. Do not apply a procedure from a similar model to another vehicle.
What to tell the workshop after transport
Keep the warning messages and any available diagnostic report before faults are cleared. Describe how the problem began and what was done while moving the vehicle. A successful start or released selector alone does not confirm that the cause has been rectified.
Article sources
The exact specification, prescribed values and repair procedure require the VIN and manufacturer documentation.
- CUPRA Born 07/2025, 10E012720AJ — towing, printed pages 292–294 (English)
- Škoda Auto Slovakia — information to provide when requesting roadside assistance
Select a vehicle brand for model-specific instructions.