TOP firma 2025 – Firmy.cz

The engine overheats

Back to driver advice

Applicability depends on the engine, equipment and vehicle specification. Selecting a brand alone does not identify a particular vehicle.

A cooling warning requires prompt action according to the vehicle's instructions. The level in the expansion tank is only one part of assessing cooling system operation.

Which vehicles this advice applies to

Volkswagen Group petrol and diesel engines. Cooling circuits for electric drives and traction batteries require separate, vehicle-specific assessment.

When to stop driving

For a red cooling warning or a STOP instruction, stop safely and switch off the engine. Follow the exact message and handbook. Do not open a hot or pressurised expansion tank. If steam or hot coolant is escaping, do not open the bonnet either.

An empty expansion tank is not a reason simply to refill and drive on. Arrange professional assistance. Repeated overheating needs its cause established even if the temperature returns to normal after cooling down.

Possible causes

The system needs the correct coolant, circulation and effective heat dissipation. Neither the coolant level nor a running radiator fan alone identifies the fault. Depending on the design, pumps, thermostats, valves and temperature sensing also require checking.

On some engines with a controlled coolant pump, a mechanism fault can restrict the necessary circulation. This does not mean every engine with similar symptoms needs a new pump. The actual system design and findings determine the diagnosis.

What to record for the workshop

  • Whether the warning appeared in traffic, under higher load or shortly after starting.
  • Whether cabin heating stopped at the same time and whether coolant had been disappearing.
  • Recent cooling system or timing drive work and how the symptoms developed.

Correct level does not complete the checks

The workshop needs to assess leaks, circulation and the credibility of temperature readings. Controlled systems may also require functional checks of their actuators. Clearing the warning does not replace these checks.

After work on the cooling circuit, filling and bleeding must follow the specific engine documentation. Where the manufacturer specifies a guided diagnostic function, it forms part of the repair. The result should be checked under conditions representative of the original problem.

Related advice and services