Electric vehicle or plug-in hybrid will not charge
VolkswagenVolkswagen Commercial VehiclesAudiŠkodaSEATCUPRAChoose a brandChange brand
Failure to start charging does not necessarily mean a traction-battery fault. The vehicle, cable, charging point, authorisation and settings must be distinguished.
What to do now
If a connector is damaged, there is a smell, smoke or a fault warning, stop trying to charge and arrange appropriate assistance. Never pull the connector out by force. Follow the vehicle and station instructions for normal stopping and release.
Information to have ready
VIN, AC or DC, state of charge, the exact message and whether the problem also occurs at another compatible charging point.
The actual equipment and vehicle version determine the inspection scope and procedure.
Symptoms and inspection in detail
Assess AC and DC separately
The vehicle must support the charging method; not every plug-in hybrid supports DC. Different parts of the charging path are involved, so working AC does not automatically establish fault-free DC or vice versa.
Station, access and vehicle settings
Check station instructions, authorisation and confirmation that charging has actually started. Depending on equipment, check scheduled times, the target charge level and current limits. Record messages before restarting; the exact procedure depends on the vehicle and operator.
Slow charging and a locked connector
Power depends on state of charge, battery temperature and available station output. Low instantaneous power alone does not prove a fault. Emergency release is not a universal procedure: use it only under the conditions in the relevant manual. Do not work on the high-voltage system.
Back to driver advice Back to driver advice Back to driver advice Back to driver advice Back to driver advice Back to driver advice Back to driver advice